Products

Camera Extension Cable - 75'75 Foot color camera cable.*Sold as an Individual Piece 

Camera RCA to CEC ConnectorCamera Connector is a 4-pin female camera adapter to RCA connectors with power.  The 31300006 Camera Connector is used ...

2.0 - 4.3" Monitor with Camera - WirelessThe WVSXS43 single-camera system includes a 4.3-inch wireless LCD monitor, a wireless rear camera, a 12-v...

WiSight 2.0 - 4.3" Monitor with Camera for Prewire System - WirelessThe WVSXP43 single-camera system includes a 4.3-inch wireless LCD monitor, one...

WiSight 2.0 - 7" Monitor with Camera - WirelessThe WVSXS70 single-camera system includes a 7-inch wireless LCD monitor, a wireless rear camera, a ...

WiSight 2.0 - 7" Monitor with Camera for Prewire Systems - Wireless The WVSXP70 single-camera system includes a 7-inch wireless LCD monitor, a wir...

109 Backing Plate with Gasket - Anodized AluminumUse with the Smooth Slide Rocket Launcher.

5 Rod ClusterFeatures a 30° bent butt, welded gimbal pins, anodized aluminum finish, handcrafted in the USA at a fraction of competitors prices pl...

BOOMSTICK Part #: 121Designed to put as many as 3 lines either port or starboard, PLUS another line from the stern.

Boomstick JrDesigned to put as many as 2 lines either port or starboard, PLUS another line from the stern

Crabbing Prop Stick Made from anodized aluminum Has 12" vertical adjustment and overall length is 25" All stainless hardware It can be mounted ...

Double Rod Holder Part #: 105 The double rod holder, with its bent butt and angled rod holders, plus solid weld contruction from 60 series aluminu...

Double Rod RiggerPart #: 108The double rod rigger is the new way to fish a rod rigger. We start with a tough 60 series aluminum with the same abil...

Gimbal MountUse with our Smooth Slide for a removeable application or create your own bait table.

Offset Triple Rod HolderOffset Kite Cluster Rod Holder

Single Rod Rigger Part #: 102Our single rod rigger with its machined slots and welded construction offers an affordable side rigger to all fisherm...

Triple Rod Holder - 30° Bent ButtMuch like our double rod holder, the fisherman now has three options from one holder. It has a solid weld constru...

.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting ...

.75" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. T...

1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on...

1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 l...

1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting...

1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting ...

1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. T...

1.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500...

8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end ...

Adhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8...

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide...

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide...

AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - SingleSingle Pack gun plunger for AT-6030 Adhesive (sold separately).

AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 AdhesivesAT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhe...

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will h...

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smalle...

AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in whit...

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is si...

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is si...

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) Whe...

Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our A...

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is si...

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is si...

AT-3B Small Black Nylon Wire Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded i...

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no s...

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in ...

AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acryl...

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It'...